Click on the image to download...( comments written by soma )
cc_scannerDX,
16 Nov 2005
...Deluxe CC scanner
Instructions
written by soma
This little beauty stores 2 values for 12 CC's (Max/Min).
There is a
Position fader that will change a CC's Value from setting 1 to setting 2
as it gets closer to it. You can control how close the position has to be to start effecting
the values using the
Width knob. You can control how fast the actual position follows
your movements using the
glide knob. You can fade from 0 to the faders' max values
or from max to 0 using the
Amp knob. You can cross fade (invert) the Max and Min values
using the
Max/Min crossfading knob. You can set which CC with be the 1st of the 12
(e.g. if set to 6 then CC's will be 6-17) using the
First controller dropdown.
You can control the start and end positions by pressing the
Numbers (fun when automated).
There are also your standard midi learn functions (press learn, move GUI, move an incoming CC).
Most controls are already mapped to the first 10 CC's or so. Please PM me with problems.
Some other uses:
To use this plugin to control multiple CC's at once:
Set the position slider to 12.. width to 0.. Amp to "all the way"..
Use the min/max knob to cross-fade between the top and bottom values.
The first 11 CC's will output their min (bottom) value when the min/max knob is to the left
(the 12th CC will output its max because the position is on it).
They will output their max when the knob is to the right.
You can adjust the value of any one cc by adjusting the values on the top or bottom
below that CC's number.
